8
Connect a power cable from your computer’s internal power
supply to each internal SCSI device.
Connecting External SCSI Devices
Connect external SCSI devices to the 68-pin external VHDCI
LVD/SE SCSI connector. Each external device requires a 68-pin
external LVD SCSI cable.
Follow these steps to connect external SCSI devices:
Connect one end of the external LVD SCSI cable to the external
LVD/SE connector on the Adaptec SCSI Card 29160LP.
S
TEP
4
We recommend that you connect
only
Ultra160 and
Ultra2 SCSI devices to the external SCSI connector. If you
also attach slower Ultra SCSI devices, the data transfer speed
of the Ultra160 and Ultra2 SCSI devices drops to the speed of
the slower devices.
Power input connector
on the back of the
Power cable (from the power
supply inside the com-
N
OTE
S
TEP
1
29160LPRevA.fm Page 8 Tuesday, May 2, 2000 4:04 PM
