10
Double-check for proper SCSI bus termination.
To use the Adaptec SCSI Card 29160LP, the card’s driver software
must be installed for your operating system (for example,
Windows
®
98, Windows 2000, Windows NT
®
, Novell NetWare,
and so forth). The Ultra160 Family Manager Set contains driver
software for many of the popular operating systems.
Refer to the
Ultra160 Family Manager Set User’s Guide
and
Adaptec SCSI Card 29160LP User’s Reference
for instructions on
either installing driver software when installing your operating
system, or installing driver software when the operating system is
already installed.
S
TEP
5
Using a single-ended terminator will cause the SCSI
bus to run in single-ended mode. LVD termination must be
used to obtain Ultra2 transfer rates.
C
AUTION
A
DAPTEC
SCSI C
ARD
D
RIVER
S
OFTWARE
Operating system versions released after November
1999, may have embedded driver support for the Adaptec
SCSI Card 29160LP. To determine if the card is supported by
the operating system you are using, read the operating system
manual or contact the operating system vendor for informa-
tion. Visit Microsoft’s Web site <
http://www.microsoft.com
>
for more information regarding hardware compatibility.
N
OTE
29160LPRevA.fm Page 10 Tuesday, May 2, 2000 4:04 PM
