Exit SCSI Device Configuration
When configuration of SCSI devices is complete, press Esc to exit
SCSI device configuration; you will be prompted to either save or
abandon device configurations, as shown in Figure 3-14.
Exit the EISA Configuration Utility
Once the host adapter and SCSI devices are properly configured,
save and exit the EISA Configuration utility as instructed on the
screen’s menu. The following section, Utilities, describes the two
utilities available in the EISA Configuration utility.
Utilities
Select Utilities from the EISA Configuration utility to access the
two SCSI utilities that are available with your host adapter, as
shown in Figure 3-15.
Save/Abandon device configuration
( ) Save device configurations
( ) Abandon device configurations
<ESC>
Figure 3-14. Exiting SCSI Device Configuration
Adaptec AHA-2740 Series User’s Manual
Stock Number: 510381-00 / Rev. C (Page 3-19)
Print Spec Number: 491709-00 Rev C
Current Date: 9/1/93 ECN Date: 9/14/93
Configuring the Host Adapter
3-19
