Adaptec 2100S - SCSI RAID Controller Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 40

Adaptec 2100S - SCSI RAID Controller Скачать руководство пользователя страница 28

27

Note:

The Adaptec drivers are for Linux kernel versions

2.2.12-20 and 2.2.14-5.0. If your kernel has been updated by a
patch, the drivers might not function. In this case, contact
your technical support representative for assistance.

Adaptec controller and RAID management for Linux is available
through the Adaptec SMOR utility, CLI, and Storage Manager.

1

Install the Adaptec controllers and storage devices according to the
instructions in Controller Installation. For more information, see the

Installation Guide

for your controller.

2

If you want to install Linux on a disk array, use the bootable CD
installation utility, SMOR or CLI to configure any disk arrays before
beginning the operating system installation.

Note:

Any partitions created on disks that are not part of an

array will be unavailable if you subsequently use the disk in
an RAID configuration.

3

Boot the system from the Adaptec Linux boot disk and continue
with the Linux installation according to the instructions in the

Installation Guide

.

«
...
26
27
28
29
30
...
»

Содержание 2100S - SCSI RAID Controller









































Отзывы:

Нет отзывов