Adaptec 2100S - SCSI RAID Controller, Быстрый старт, Страница: 18 / 40

17
selected adapters to control which adapter is the boot controller. This
procedure can also be helpful in situations where it is physically
difficult to manage the slot order.
If your system contains multiple Adaptec controllers, you can confirm
which controller has been chosen as the booting controller by running
SMOR. This utility will display a list of all Adaptec controllers, starting
with the booting controller.
Installing Memory Modules
Caution: Adaptec controllers with expandable cache
must have at least one memory module installed. If
more than one is installed, they must be the same type
and capacity.
Adaptec SCSI RAID controllers support up to 128 MB of cache using a
onboard DIMM sockets. Adaptec recommends that all SCSI RAID
controllers have at least 32 MB of cache installed. To confirm that the
memory modules are properly installed, start SMOR and select the
SCSI RAID controller to display the amount of cache memory reported.
Adaptec controllers will report 16 MB less cache than is actually
installed because the first 16 MB of memory is used for the onboard
processor. The total installed memory is reported correctly.
!