12
3 Installation and Operation
The packing condition and the external outlook of the unit should be inspected
carefully before installation. Retain the packing material for future use.
3.1.
Unpacking
3.1.1 Unwrap the pack of UPS.
3.1.2 Take the UPS out of the PE foam.
3.1.3 Standard Package includes:
¾
1 set of Quick Start Manual
¾
1 set of User's Manual
¾
1 set of UPS communication software with RS232 cable
¾
1 set of accessories pack
3.1.4 Package for the UPS with Isolation transformer & dual input:
¾
Ditto, but with additional 3pcs wire No 7.
3.1.5 Package for the UPS without isolation transformer but dual input:
¾
Ditto, but with additional 1pcs wire No. 7.
(p.s. Wire No. 7 is to be used at the input/output terminal block of the UPS.
Please refer to Chapter 3.4 for installation.
A1
A2
A3
S1
S2
S3
S4
B1
B2
B3
x8
x6
x4
x2
x2
x2
x2
x1
x4
x4
for 2U
for 3U
PM10K only
X1
A1
X1
A2
X1
A3
Power Module
model
13
3.2.
Selecting Installation Position
It is necessary to select a proper environment to install the unit, in order to
minimize the possibility of damage to the UPS and extend the life of the UPS.
Please follow the advice below:
1. Keep at least 30cm (12 inches) clearance from the rear panel of the UPS to
the wall.
2. Do not block the air-flow to the ventilation openings of the unit.
3. Please check the installation site to avoid overheat and excessive moisture.
4. Do not place the UPS in an environment near dust, corruptive or salty material
or flammable objects.
5. Do not expose the UPS to outdoors.
30%~90%
40
Содержание 1_1 online mp series
Страница 19: ...36 192321132015003...