Adam Eco4 Скачать руководство пользователя страница 2

Страница: 2 / 52

0 2

IMPORTANT

These Notes Must Be Read Before Installation

This appliance is an Inset Live Fuel Effect appliance that provides radiant or combined

radiant and convected heat; it cannot and should not be used as the main heating

source within a property.

The appliance is designed to fit most types of fireplaces with a natural draught flue as

listed in the Installation Requirements.

The appliance must be installed by a competent person in accordance with the Gas

Safety (Installation and Use) Regulations 1998.

A Gas Safe Registered installer must be used for this purpose.

Read all these instructions before any installation takes place and in conjunction with

the appliance on site.

This appliance must be installed in accordance with the rules in force and only used in

a sufficiently ventilated space.

This appliance is factory set and tested for operation on the gas type, and at the

pressure stated on the appliance data plate.

After a new gas appliance (excluding flueless cookers) has been fitted, the Building

Regulations in England and Wales require that the installation must be notified to your

Local Authority. Your Gas safe registered engineer needs to do this, failure to register

the appliance may affect your warranty.

Содержание Eco4





















































Результаты поиска

Содержание Eco4

Отзывы:

Похожие инструкции для Eco4

Бренды по названию

Популярные бренды

Adam Eco4, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Eco4

Отзывы:

Похожие инструкции для Eco4

Бренды по названию

Популярные бренды