EN
Month
Year
FAC-SIMILE
EC DECLARATION OF CONFORMITY
The undersigned:
ADAM PUMPS S.p.a.
Via della Resistenza, 46/48 -41011, Campogalliano (MO), ITALY
DECLARES,
under its own responsibility, that the equipment described:
Description: Electronic Meter
Models: G-FLOW DISPLAY, G-FLOW PULSI, G-FLOW REED SWITCH
Year of construction: refer to the production date printed on the label affixed to the product, it complies the legal requirements in the
directives:
the use and maintenance manual must be carefully stored near the machine in an environment
protected against humidity and heat. The manual must accompany the machine if sold. It is prohibited
to damage, modify or remove any part of the manual.
Machine
: DIESEL FUEL METER WITH GEARS
Models
:
G FLOW, G FLOW PULSI, G FLOW REED
USE AND MAINTENANCE MANUAL
Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the
Member States relating to electromagnetic compatibility.
The documentation is available to the relevant authority, against a justified request, from ADAM PUMPS S.p.a. or by sending a
request to: [email protected]
The person authorised to compile the technical file and draw up the declaration is Davide Stassi as legal representative.
Place and date of the document
Campogalliano, January 14, 2020
The legal representative
TABLE OF CONTENTS
1 - GENERAL WARNINGS
2 - SAFETY INSTRUCTIONS
2.1 Safety measures
2.2 First aid
2.3 Protective devices
2.4 Packaging
2.5 Contents
3 - OPERATING CONDITIONS
3.1 Environmental conditions
3.2 Allowed fluids / Forbidden fluids
3.3 LCD display (Only Display version)
3.4 Display orientation
3.5 User Controls - key
4 - INSTALLATION
4.1 General information
4.2 G-FLOW Display
4.3 G-FLOW PULSE Outlet
4.4 G-FLOW REED Outlet
5 - INTENDED USE
5.1 Main screens
5.2 Partial
5.3 Total (non-resettable)
5.4 Period total (partial is resettable)
5.5 Remaining stock
5.6 Minimum stock level alert
5.7 Last refuelling operations
5.8 Instant flow rate
6 - CALIBRATION
6.1 Definitions
6.2 Calibration procedure
6.3 Selecting the unit of measurement
6.4 Custom unit of measurement
6.5 Factory reset
7 - TROUBLESHOOTING
8 - MAINTENANCE
8.1 Replacing the batteries (Only Display
version)
8.2 Cleaning
9 - DEMOLITION AND DISPOSAL
10 - WARRANTY
11 - TECHNICAL SUPPORT
