EN
The warranty will not be applied in the following cases
Failure to use or install the product according to Adam Pumps' instructions
The product has been used with unauthorised fluids.
The product has been modified or tampered with
The product is used in an area with power supply defects (voltage changes, current phase shift, etc.)
The product is used without the supplied suction filter (inside or outside the pump).
Immediately excluded from the warranty are: adhesive labels, plastic and metal casing, keyboards and masks, components
subject to wear such as blades, impellers, graphite brushes (where present in the motors), seals and gaskets in general.
11 - TECHNICAL SUPPORT
The Manufacturer is always available for any information required on installation, operation or maintenance of the
machine. The Customer should ask the questions clearly, with reference made to this Manual and to the instructions
listed. Always remember to specify the type of product and the production date on the label under the LCD display
mask (G-Flow display version) or under the metal cover plate (G-Flow Pulse/Reed version).
FUNCTIONS:
Partial (resettable)
Total (non-resettable)
Period totaliser (resettable)
Display of instant flow rate
Calibration
Display of last 5 dispensing
operations
Stock display
Minimum stock level alarm
(*): Measurement taken after calibration up
to 90 LPM; the precision reaches ± 0.5%
over 90 LPM
(**) Approximately 79 Pul/out
Technical specifications
G-FLOW REED SWITCH
G-FLOW DISPLAY/PULSES
