Adam Equipment NBL 12001e, Руководство по эксплуатации

Страница: 34 / 52

EN
© Adam Equipment Company 2015
33
3016612481Rev2.00-Jul15
The parameters that can be set are:
EnAbLE
EnAbLE EnAbLE
EnAbLE
On = serial port enabled
OFF = serial port disabled
bAvd bAvd bAvd bAvd Set Baud Rate. Selectable values: 4800 4800 4800 4800 , 9600 9600 9600 9600 , 19200 19200 19200 19200 or 38400 38400 38400 38400
PARITY PARITY PARITY PARITY Set Parity. Selectable values: nOnE nOnE nOnE nOnE , EVEN EVEN EVEN EVEN or ODD ODD ODD ODD
STABLE STABLE STABLE STABLE
ON = print only when reading is stable
OFF = print regardless of stability
CONTIN CONTIN CONTIN CONTIN
ON = Send data continuously over serial port
OFF = Only send data when [PRINT] is pressed
PErIOd
PErIOd PErIOd
PErIOd
ON = Set the RS-232 to send data periodically. Range 1 to 999 seconds
OFF = No periodic data transmission
FORMAT FORMAT FORMAT FORMAT
Format of serial output data. Selectable parameter from:
SINGLE = Serial data output sent as a single line
STANDARD = Serial data output sent in standard format
FORM 1 = Serial data output sent in custom-designed format FORM 1
FORM 2 = or FORM 2 (See section 13.4).
13.4 FORMAT OF CUSTOM FORMS #1 and #2
If FORM1 or FORM2 is selected, the format be changed by the user using a selection of
available data. By default the 2 forms are the same as the standard form unless changed
by the user as below.
When “ FORMM1 FORMM1 FORMM1 FORMM1 “ or “ FORMM 2 FORMM 2 FORMM 2 FORMM 2 “ is selected, the user can set the information to be printed on
each line of the form. Pressing the [Up] or [Down] keys will cycle through the options
available. The options are:
INST ID INST ID INST ID INST ID
Instrument ID number
SER No SER No SER No SER No
Serial Number
TIME TIME TIME TIME
Time
DATE DATE DATE DATE
Date
NET
NET NET
NET
Net Weight (Gross weight – Tare Weight)
GROSS
GROSS GROSS
GROSS
Gross Weight
TARE TARE TARE TARE
Tare Weight
vNiT vNiT vNiT vNiT
Unit weight in parts counting mode
CoV CoV CoV CoVNT NT NT NT
Number of items in parts counting mode
REF REF REF REF
100% weight in percent weighing mode
PER PER PER PER
Percentage of reference weight in percent weighing
LO LIM LO LIM LO LIM LO LIM
Low Limit when check weighing (Not used)
HI LIM HI LIM HI LIM HI LIM
High Limit when check weighing (Not used)
CR LF CR LF CR LF CR LF
Inserts a blank line
END
END END
END
Signifies the end of the report
(When END is entered the display returns to the
SERIAL SERIAL SERIAL SERIAL Sub-menu)
Enter the data to be printed on the first line by pressing [Up] or [Down] to cycle through
the options. If the current information is OK then press [Setup] to move to the next line.
e.g. “
LINE 01
LINE 01 LINE 01
LINE 01
”, “
DATE
DATE DATE
DATE
” – will print date on first line of output form.