EN
© Adam Equipment Company 2018
16
6.2
SETTING
THE
BACKLIGHT
AND
AUDIBLE
ALERT
BEEP
The backlight and audible alert may be enabled or disabled by the user. If the
backlight is disabled, the battery life will be greater. The following settings are
available: (beep settings available in SW ver. 2.5 onwards)
bL AU
Sets the backlight to operate automatically when a weight is
placed on the balance or a key is pressed.
bL off
Sets the backlight to be off.
bL on
Sets the backlight to be permanently on.
bP on
Sets audible alert beep on
bP oFF
Sets audible alert beep off
1)
To set this parameter press the
[Mode]
key during self‐checking test when
turning on the balance.
2)
After a few seconds, the display will show the first function
F1 UNT
.
3)
Press the
[Mode]
key to select
F2 EL
.
4)
Press the
[‐>0/T<‐]
key once to view the current settings for the backlight, and
twice to view settings for the alert beep.
5)
To change the settings press the
[Mode]
key
to scroll through other settings
as shown above.
6)
Press
[‐>0/T<‐]
to store a particular setting. Press again until the display
returns to
F2 EL
7)
When
F2 EL
is displayed press the
[Print]
key to return to weighing or press
[Mode]
to go to the next function.
6.3
SETTING
THE
PRINTING
PARAMETERS
/
ACCUMULATION
1)
To set this parameter press the
[Mode]
key during self‐checking test when
turning on the balance.
2)
After a few seconds, the display will show the first function
F1 UNT
.
3)
Keep pressing the
[Mode]
key until
F3 SEr
is displayed.
4)
Press the
[‐>0/T<‐]
key to view the current settings.
Содержание HCB 1002
Страница 31: ...EN Adam Equipment Company 2018 31...
