Adam Equipment CBW 15, Руководство пользователя

Страница: 8 / 28

the level and the scale is supported by all four feet.
•
Attach the power supply cable to the connector on the bottom of
the scale. Plug in the power supply module. The power switch is
located on the base on the right side of the scale.
•
The scale will first display the model number (CBW 30- where 30
denotes the capacity of the scale in kg), followed by the revision
numbers (1.2-2.03 where 1.2 is the current hardware revision
number of the main circuit board and 2.03 is the current software
revision number). A self-test is followed next. At the end of the
self-test it will display “
ZERO
”, if the zero condition has been
achieved. A stable symbol and “
GROSS
” indicators are also
displayed.
4.0 KEY DESCRIPTIONS
KEYS PRIMARY FUNCTION SECONDARY FUNCTION
[Zero]
Sets the zero point for all
subsequent weighing. The
display shows zero. or
[Enter]
key when
setting parameters or other
functions.
[Tare]
It tares the scale and stores the
current weight in memory as a
tare value, subtracts the tare
value from the weight and
shows the results. This is the
net weight. A secondary function is
available to increment the active
digit when setting a value for
parameters or other functions.
© Adam Equipment Company 2006
6