Adam Equipment CBC 15, Руководство по обслуживанию

Страница: 10 / 20

@Adam Equipment Company 2005
10
Suggested Calibration weights for CBC Series:
CBC SERIES
Model # CBC 3 CBC 6 CBC 15 CBC 30 CBC 45
2000g 5000 g 10 kg 20 kg 30 kg
Suggested Calibration Weights for CBCa Series:
After calibration, the scale should be checked whether the calibration and linearity is correct.
If necessary repeat calibration, ensure that the scale is stable before accepting any weight.
6.0 FACTORY PARAMETERS (VERSION 1.1-1.8 TO 1.2- 2.02)
To set the factory parameters after fitting a new PCB or when corruption is evident it is
necessary to enter a secure menu. This is done by entering the factory password number
when requested.
To enter the factory parameter menus press the [Tare] key during the initial counting of the
display after power turned on. The Weight Display will show " " requesting the
password number to be entered.
The factory password is "
" and will over ride any other password they may have been
programmed and possibly forgotten.
Press the " " key four times. The display will show "
", Press the [Tare] key.
The Factory Parameter menu has the same 6 functions as described previously that can be
accessed by using the [Unit Wt . ] key ( [Lb/kg] key on CBCa series) to scroll through and the
[Tare] key to enter.
7.0 TWO POINT FACTORY CALIBRATION
When the parameter menu shows " " press the [Tare] key.
The display will then show "
" to request all weight be removed from the platform.
Press the [Tare] key to set the zero point.
The display will then show the first calibration weight needed. It will be one third of the scale
capacity.
CBCa SERIES
Model # CBC 6a CBC 12a CBC 35a CBC 65a CBC 100a
5 Ib / 2 kg 10 lb / 5 kg 30 lb / 10 kg 50 lb / 20kg 100 lb / 30 kg