Adam Equipment AZextra 30P, Руководство пользователя

Страница: 9 / 24

© Adam Equipment Company 2017 7 of 22
3.0 OPERATION
3.1 ZEROING THE DISPLAY
•
You can press the [Zero] key when no tare is entered to set the
zero point from which all other weighing is measured. This will
usually be necessary when the platform is empty.
•
When the zero point is obtained the Weight window will show an
arrow next to the Zero legend marked under the Weight window.
•
The scale has an automatic re-zeroing function to account for
minor drifting or accumulation of material on the platform.
However you may need to press [Zero] to re-zero the scale if
small amounts of weight are shown when the platform is empty.
3.2 TARING
•
Taring is used to eliminate the weight of a container so that only
the net weight is displayed.
•
Zero the scale by pressing [Zero] if necessary. The zero indicator
will be on.
•
Place an empty container on the platform. The weight of the
container will be displayed.
•
Press [Tare] to zero the scale. The weight that was displayed is
stored as the tare value and that value is subtracted from the
display, leaving zero on the display. The Net indicator will be on.
As product is added only the weight of the product will be shown.
•
When the product and container are removed the weight window
will show a negative value. If a different container is to be used,
remove this negative tare value by pressing the [Tare] once more.