Adam Equipment AZextra 30P, Руководство пользователя

Страница: 6 / 24

© Adam Equipment Company 2017 4 of 22
2.2 SETTING UP THE SCALES
•
The scales come with a stainless steel platform, packed
separately.
•
Place the platform in the receptacles on the top cover.
•
Do not press with excessive force as that could damage the load
cell inside.
•
If an optional scoop has been supplied, place it on top of the
platform.
•
If an optional display on Pillar is supplied, install the pillar in the
upright position into the socket at the rear of the scale by carefully
pushing the cable inside the pillar rod. Secure the pillar rod to the
socket by using two M4 screws. A black plastic cap is provided to
seal the socket from the bottom to avoid damaging the cable.
•
Level the scale by adjusting the four feet. The scale should be
adjusted such that the bubble in the spirit level is in the centre of
the level and the scale is supported by all four feet.
•
Turn the power ON using the switch located on the right side of
the base.
•
The unit will display the software revision number in the Weight
window and count down to zero while performing a self-test.
•
When ready all three displays will show zero.
2.3 DISPLAY WINDOWS
Not applicable for South Africa and Far East