4.0 KEY
DESCRIPTIONS
[Tare/
↵
]
Sets the zero point for all subsequent weighing. The display shows zero.
Tares the scale. Stores the weight currently on the scale as tare value, subtracts
the tare value from the gross weight and shows the results.
A secondary function, is of “Enter” key used when setting up the value for the
Parameters.
[CHK/PRINT/
⭡
]
CHK: Selects checkweighing. Used to set the Low/High weight limits while
checkweighing.
PRINT: Sends the results to a PC or a Printer using the RS-232 interface. It also
adds the value to the accumulation memory if the accumulation function is not
automatic.
⭡
: Up directional button for scrolling. Also used for incrementing the active digit
when setting a value for Parameters.
[Disp/Mode/
⭢
]
Selects the weighing unit to be displayed from those which are enabled. See
parameter rS1 in section 7.2.
A secondary function,
⭢
is to move the active/flashing digit to the right when
setting values for Parameters.
[Func/Set/
⭣
]
Selects the Functions of the scale. If the scale is weighing, it will select parts
counting. If it is not in weighing mode, it will return the user to weighing.
A secondary function (SET) will bring up the settings menu. Also used to set
values used for parameters
[
0
/Esc]
Used to zero the scale.
A secondary function (
ESC
) is to return to normal operation when the scale is in a
Parameter setting mode.
/ ST/ CE]
To switch on and switch off the scale.
ST: Secondary function allows the user to store/ recall checkweighing limits.
