Remove the weight from the scale if overloaded.
Make sure the pan is attached.
Indicates the load cell or the electronics may be faulty.
If the problem persists contact your dealer or Adam Equipment
for assistance.
Err 9
Check weigh limits
error
Shown if the low limit is set higher than the current high limit.
Reset High limit or different low limit.
FAIL
Calibration error.
Improper calibration (should be within + 10% of the factory
calibration). The old calibration data will be retained until the
calibration process is complete.
If the problem persists contact your dealer or Adam Equipment
for assistance.
12.0 REPLACEMENT
PARTS
AND
ACCESSORIES
If you need to order any spare parts and accessories, contact your supplier or Adam
Equipment. A partial list of such items is as follows-
Power Supply Module
Replacement Battery
Printer, etc.
13.0 SERVICE
INFORMATION
This manual covers the details of operation. If you have a problem with the scale that is
not directly addressed by this manual then contact your supplier for assistance. In order to
provide further assistance, the supplier will need the following information which should be
kept ready:
A.
Details of your company
Name of your company:
Contact person’s name:
Contact telephone, e‐mail, fax or any other methods:
B.
Details of the unit purchased
(This part of information should always be available for any future correspondence. We suggest you
to fill in this form as soon as the unit is received and keep a print‐out in your record for ready
reference.)
Model name of the scale:
Serial number of the unit:
Software revision number
(Displayed when power is first turned on):
Date of Purchase:
Name of the supplier and place:
C.
Brief description of the problem
Include any recent history of the unit. For example:
‐Has it been working since it’s delivered
‐Has it been in contact with water
‐Damaged from a fire
‐Electrical Storms in the area
‐Dropped on the floor, etc.
