© Adam Equipment Company 2000
6
Sampling
a. After selecting parts counting with the MODE key, press the UNITS key to select the
sample size (10, 20, 50, 100 pcs)
b. Put the sample number (same as selected in step a) on the scale and press PCS
key. When the symbol “C” disappears the sampling procedure is finished and you
can start to use the counting function.
c. If the unit weight is too small (less than 0.2 of a scale division), the display will show:
--or--
PCS.
It would be best to use larger parts or to use ten times as many parts as
required and reduce the displayed values to 1/10
th
.
2.3 PERCENTAGE % MODE
Sampling
a. After selecting % Weighing with the MODE key press the UNITS key to choose
either 100.0%, 100.00%.
b. Put the item to be considered 100% onto the pan and press the PCS key. During
the sampling, the % symbol will be flashing and when the sampling procedure is
finished, the % symbol will be stable. When the unit weight is smaller then 0.2d, the
display will show - - or - -%.
Remarks
1. When you finish the procedures of selecting the sample size in the counting mode or
percentage (%) mode, press the ENTER key to change back to the weighing mode.
Press the PCS key to return to counting or percentage mode.
The scale will memorise the previous data automatically so that you can continue to
count parts or weigh in percentage.
2. The memory of sampling size data will be cleared automatically every time the
MODE key is used to select parts counting or percent weighing.
