Aczet CZ 1201, Руководство по эксплуатации

Страница: 16 / 45

5.8.1 Linearization non NTEP models (low resolution)
13
• Press repeatedly until “tECH” appears
• Press , “Pin” appears
• Press , and successively, “P1 Lin” appears
• Press a new, “Pin” appears again
Operation Balance Display
MODE
• Start balance by pressing Whilst the balance carries out
a self test, press until “F1 Unt” appears
• Press successively , and , „LoAd 0“ appears;
after the apparition of the stability display and the signal sound,
“LoAd 1” will be displayed
MODE
Tare
7.4.2 NTEP models
In order to display the total weight of the samples, remove weight from the weighing plate, wait for
the zero display and press . The number of weighing actions and the total weight of the samples
will be displayed shortly.
With the further samples proceed as described above.
Then appears for 2 seconds the weight of both test items, before the
weight of the second test item will appear again.
• Press , “ACC 1” is shortly displayed, then appears once
more the weight of the sample which now is stored.
Balance Display
• Put on the first sample
• The weight of the first sample is displayed.
• Remove the first sample and put on the second one. The weight of
the second sample is displayed.
Operation
• Start balance by pressing . The balance will carry out a self-
test. Wait for “0.0” display.
26