ACV Prestige CPVC, Руководство пользователя

Страница: 13 / 44

Pre-Installation Requirements
10
Combustion Air Contamination
If the PRESTIGE combustion air inlet is located in an
area likely to cause or contain contamination, the
combustion air must be repiped and terminated at
another location. Contaminated combustion air will
damage the unit and its burner system, resulting in
possible severe personal injury, death or substantial
property damage.
Do not operate the PRESTIGE if it’s combustion air
inlet is located near a laundry room or pool facility.
These areas will always contain hazardous con-
taminants.
Pool and laundry products, common household and
hobby products often contain fluorine or chlorine
compounds. When these chemicals pass through
the burner and vent system, they can form strong
acids. These acids will corrode the heat exchanger,
burner components and vent system, causing seri-
ous damage and presenting possible flue gas
spillage or water leakage into the surrounding area.
Please read the information listed below. If contam-
inating chemicals are located near the area of the
combustion air inlet, the installer should pipe the
combustion air inlet to an outside area free of these
chemicals.
DANGER
WARNING
Potential contaminating products
- Spray cans containing chloro/fluorocarbons
- Permanent Wave Solutions
- Chlorinated wax
- Chlorine - based swimming pool chemicals /
cleaners
- Calcium Chloride used for thawing ice
- Sodium Chloride used for water softening
- Refrigerant leaks
- Paint or varnish removers
- Hydrochloric acid / muriatic acid
- Cements and glues
- Antistatic fabric softeners used in clothe dryers
- Chlorine-type bleaches, detergents, and clean-
ing solvents found in household laundry rooms
- Adhesives used to fasten building products and
other similar products
Areas likely to contain these products
-
Dry cleaning / laundry areas and establishments
- Beauty salons
- Metal fabrication shops
- Swimming pools and health spas
- Refrigeration Repair shops
- Photo processing plants
- Auto body shops
- Plastic manufacturing plants
- Furniture refinishing areas and establishments
- New building construction
- Remodeling areas
- Garages with workshops