ACV 06627301 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 36

ACV 06627301 Скачать руководство пользователя страница 28

CHECKS BEFORE STARTING UP

•

Check that the safety valves (DHW and primary) are correctly installed and that the out-

lets are connected to the sewer.

•  Check that the DHW tank and the primary circuit are filled with water.
•  Check that the air has been correctly bled from both circuits.
•  Check that the tank’s upper air bleed valve is tight.
•  Check that the water side and heat source side pipes are correctly connected and not

leaking.

• Check that the sensor of the thermostat is correctly positioned in the dry well (see figures

below).

STARTING UP

If the tank is used as electric DHW tank only:

1.

Put the electric plug into the mains socket

2. Adjust the required temperature using the control thermostat integrated in the

electrical resistance.

If the tank is used within a heating installation:

To put the installation into service, refer to the heating boiler manual.

1.

Adjust the required temperature using the control thermostat of the tank.

SLE - SLE Plus: A1007847 - 661Y2100 • D

Starting Up

EN

28

«
...
26
27
28
29
30
...
»

Содержание 06627301





































Отзывы:

Нет отзывов