−−
Drive the vehicle slowly in two
complete circles.
In most areas, there is a variation
between magnetic north and true
north. Zone selection is required so
the compass can compensate for this
variation. To check and select the
zone set into the compass, do the
following.
Press and hold the CLOCK and
TRIP buttons until the display
changes (about 1 second).
When the display goes from
‘‘
’’ to an actual heading, the
unit is calibrated.
Press the CLOCK, TRIP, or
RESET button to complete the
calibration and return the display
to normal.
1.
CONTINUED
Trip Computer
Comf ort and Convenience Features
Compass Zone Selection
225
02/07/30 21:58:23 31S3V620 0230