Steering Column Controls
Headlights
The rotating switch on the left pod
controls the headlights. Turning this
position raises the headlights
and turns them on.
If you leave the lights on with the
ignition switch in Accessory or Lock,
you will hear a reminder chime when
you open the door.
To change between low beams and
high beams, pull back on the turn
signal lever as far as it will move
towards you, then let go. The high
beam indicator will light (see page
26
).
To flash the high beams when the
headlight doors are closed, pull back
and hold the turn signal lever. This
simultaneously raises the headlight
doors and turns on the high beams.
Release the lever and the high beams
go off. Within a few seconds, the
headlight doors will close automati-
cally.
The high beams will stay on for as
long as you hold the lever, no matter
what position the headlight switch is
in.
Instruments and Controls
switch to the first position turns
on the parking lights, tail lights, in-
strument panel lights, side-marker
light, and rear license plate lights.
Turning the switch to the second
