© 2011 American Honda Motor Co., Inc. – All Rights Reserved.
BII 45421 (1103)
11 of 22
Routing the Engine Starter Harness
37. Using isopropyl alcohol on a shop towel, clean the
area where the fuse labels will attach.
38. Attach the 40A and 3A fuse labels to the engine
starter harness fuse block.
39. Install the three relays on the engine starter harness
relay block.
40. Plug the antenna terminal into the control unit.
41. Plug the engine starter harness 28-pin connector
into the control unit.
862703AT
RELAY
BLOCK
RELAYS
FUSE BLOCK
40A
FUSE
LABEL
ENGINE
STARTER
HARNESS
Clean with
isopropyl alcohol.
3A FUSE LABEL
830631AT
ANTENNA
TERMINAL
CONTROL UNIT
ENGINE STARTER
HARNESS 28-PIN
CONNECTOR
42. Install the control unit bracket to the control unit.
43. Attach the engine starter harness relay and fuse
blocks onto the control unit bracket.
830632AT
CONTROL UNIT
BRACKET
CONTROL
UNIT
862704AT
CONTROL UNIT
BRACKET
CLIP
RELAY
BLOCK
FUSE
BLOCK
ENGINE
STARTER
HARNESS
