© 2011 American Honda Motor Co., Inc. – All Rights Reserved.
BII 45421 (1103)
9 of 22
26. Starting at the antenna end of the cable, wrap three
urethane tapes around the antenna cable at the
measurements shown.
27. Using scissors, cut one urethane tape in half. Wrap
the two halves of the urethane tape around the
antenna cable at the measurements shown.
830622AT
400 mm
(16 in.)
40 mm
(1.6 in.)
40 mm
(1.6 in.)
750 mm
(30 in.)
ANTENNA
CABLE
3 URETHANE TAPES
ANTENNA CABLE
URETHANE
TAPE
(Cut in half.)
2 URETHANE TAPE HALVES
ANTENNA
50 mm
(2.0 in.)
28. Using isopropyl alcohol on a shop towel, clean the
area where the antenna will attach.
29. Remove the adhesive backing from the antenna.
Insert the antenna plate behind the headliner, align
the antenna with the template, and attach the
antenna to the windshield. Make sure the antenna is
attached firmly to the windshield.
30. Remove the template.
31. Route the antenna cable towards the driver’s side of
the vehicle. Gently pull down the headliner, and tuck
the antenna cable behind it. Be careful not to crease
the headliner.
830623AT
TEMPLATE
HEADLINER
ANTENNA
ANTENNA
PLATE
ADHESIVE
BACKING
(Remove.)
WINDSHIELD
(Clean with
isopropyl alcohol.)
830624BT
HEADLINER
ANTENNA
CABLE
