Acumen AiP-Q9U, Инструкция по эксплуатации

Страница: 43 / 58

9CH Mobile NVR Manual 42
1.6-5 Remote device ID for remote control
Each SVR can be assigned a unique SVR ID to be accessed by the remote controller. With a
unique SVR ID set, the remote controller issues commands to a particular SVR . The rest of
NVRs are in sleep mode
1.6-6 Firmware update
Firmware update allows you to upgrade the NVR’s firmware for improving system performance.
To perform firmware update, press Enter on Setup > System > Firmware Update. There are
two ways to perform firmware update (1) via USB flash disk at the
SVR site (2) via HTML
interface via network
Prepare firmware
To prepare a firmware update, create a directory called ‘firmware’ in the USB flash disk. The
USB flash disk should use the file system FAT-16 or FAT-32. Visit our web site at
www.
acumenin .com to download the latest firmware and save the file in the directory
mentioned above. The firmware name of the SVR is ‘ FlashAiP-Q9U .bin’.
To perform firmware update using USB flash disk, follow the instructions:
1. Plug in a portable USB disk at the NVR’s USB port
2. Press Enter to start firmware update
3.
After the transfer has finished, remove the USB device and reboot the
SVR
.
4. Ensure that the firmware is located in the firmware directory of the USB disk
Export setup
The export setup feature allows a user to export internal configuration into a system file on the
USB flash disk’s firmware directory. The file can later be imported to other machines. The
imported machine’s internal configuration gets updated based on the original NVR’s
configuration. To perform Export Setup, select ‘Export Setup’ and press Enter.