Acumen AiP-Q9U, Инструкция по эксплуатации

Страница: 36 / 58

9CH Mobile
SVR
Manual 35
1.3-11 Limited recording
In many countries HDD recording may be limited and can be only accessed for a certain period
of time. Once the recorded data passes the chosen period, the data can no longer be accessed.
Set your desired period here (in days).
1.4 Alarm setup
Alarm setup menu allows the settings of external alarm switches, motion alarm, buzzer, and
alarm recording duration to be changed. To change these settings, enter the Alarm setup menu
and follow the instructions:
1.4-1 Camera select
Use the directional arrows to select camera you wish to configure
1.4-2 Alarm input type
The NVR's alarm inputs can be configured as normally open (N/O) or normally closed (N/C) for IP
cameras where the alarm signal from an IP camera activates an alarm.
1.4-3 Motion enable
‘Motion Enable’ enables motion alarm recording, after the motion detection area (‘Motion Area
Setup’) has been set. Press Left or Right at Motion Enable to change the setting.
1.4-4 Motion sensitivity
There are eight levels of sensitivity adjustable for motion alarm triggering, ranging from
‘Highest’ to ‘Lowest’. Press Left or Right to change the sensitivity setting.