Acuity Brands nLight UNITOUCH, Руководство пользователя

Страница: 28 / 39

Acuity Brands | One Lithonia Way Conyers, GA 30012 | Phone: 800.535.2465 | www.acuitycontrols.com | © 2019 Acuity Brands Lighting, Inc. | All rights reserved. | Rev. 11/14/2019
Technician Mode
To access Technician Mode, one must be logged in as an administrator and is accessible through the hamburger
menu. This section is allocated to perform device level programming of channels, input/output devices on the nLight
chain.
Screen Description
Figure 25 - Technician Mode screen
The Technician Mode screen can be accessed through
the hamburger menu by the following workflow. From
the main dashboard:
1. Press the hamburger button on the top left.
a. Sidebar should appear
2. Press the Technician Mode button
a. If not already logged in, a prompt will
be made to enter the administrator PIN
Channels
The nLight UNITOUCH allows configuration and control of up to 15 channels. Out of the factory only the first two
channels are enabled to be visibly exposed to non-administrator screens. The other channels must be enabled through
the toggle button
and the channel’s control type must be set to either “Lights”, “CCT” or “Shades” .