ACU-RITE 200S READOUTS, Справочное руководство

Страница: 46 / 82

32 I
I - 3 Milling Specific Oper
ations
Incline, and Arc Milling form entry
The following soft keys are available while in the entry form.
Incline Milling
The Incline Milling form is used to specify the flat surface to be milled.
The data is entered through this form. Data input will allow this
feature to be defined. The following fields require data input.
„
Plane: Select the plane by pressing the PLANE soft key. The
current selection is shown on the soft key and in the plane field. The
graphic in the message box aids in selecting the correct plane.
„
Start Point: Enter the coordinates of the start point, or press
TEACH to set the coordinate to the current position.
„
End Point: Enter the coordinates of the end point, or press teach
to set the coordinate to current position.
„
Step: Enter the step size. When milling, this is the distance
between each pass or each step along the line.
Press the ENTER, or RUN soft key to execute the surface milling
operation. Press C hard key to exit the feature, saving it for future use.
Function Soft key
Press to select a plane ([XY], [YZ], or [XZ]
Press to execute the milling operation
Press to use the current absolute position
The Step size is optional. If the value is zero, the operator
decides at run-time how far to move between each step.
The forms will be cleared from memory when ever there
is a power cycle.