Installation and Commissioning Guide - Split Ducted ESP Plus/Ultima Indoor Unit
Doc. No.0525-078
Ver. 2 190925
32
Installation and Commissioning Guide
Split Ducted ESP Indoor Unit
Zone Control Identification
Zone Control
1
2
3
4
5
11
10
9
7
8
6
1
Mode On/Off button
Turn the zone ON or Off.
2
Room Temperature button
When pressed displays the actual room
temperature reading and room temperature
LED flashes.
3
Damper Position Indicator
Indicates the position of the damper.
Number of vertical bars shown is relative
to the opening angle of zone damper. The
more bars, the more opened the damper is.
4
COOL Mode Indicator
Indicates that the zone is providing cooling
to your area.
5
HEAT Mode Indicator
Indicates that the zone is providing heating
to your area.
6
Temperature Display
Indicates the set temperature or actual
temperature during operation.
7
Zone Indicator
8
ESP AUTO Mode Indicator
Illuminates when the Zone Control will
automatically adjust the position of zone
damper to regulate the temperature.
9
OFF Indicator
Illuminates when zone or unit is turned off.
10
Set Temperature UP button
Raises room temperature setpoint for
warmer room temperature.
NOTE:
It is not possible to adjust the temperature
setpoint of Zone Control by more than 2
degrees higher than setpoint temperature
of master control.
11
Set Temperature DOWN button
Lowers room temperature setpoint for
cooler room temperature.
NOTE:
It is not possible to adjust the temperature
setpoint of Zone Control by more than 2
degrees lower than setpoint temperature
of master control.