ActronAir CL01-2G, Руководство по эксплуатации

Страница: 21 / 30

Operation Manual
CL01-2 Wall Controller
Operation Manual - CL01-2 Wall Controller
Document: 0525-081 Ver. 1 190903
21
13. Dual control operation
13.01. Mimic Control
ACTRONAIR COMMERCIAL
AIR CONDITIONING UNIT
* Example above is for illustration purposes only and shows
that Control Interface #1 remotely re-located from the air
conditioning unit.
S H O P P I N G C E N T R E
PLANT
ROOM
CONTROL
INTERFACE # 1
*
CONTROL
ROOM
(Optional)
CONTROL
INTERFACE # 2
Mimic Control Operation
• The air conditioning system can be operated from either of two control interfaces.
•
Information displayed on the control interfaces are identical (Valid for CP05/CP10 only).
• Last control interface used has the priority.
Example 1:
Using Control Interface # 1, the cooling operation is started, both control interfaces will now show the system is in
cooling mode. If another person uses Control Interface # 2 to select heating mode, the system will now change to heating
operation and both controls will display that the system is in heating mode.
Example 2:
Using Control Interface # 2, the room setpoint temperature is set at 16.0
o
C, both control interfaces will now show that the
room setpoint temperature is at 16.0 o C. If another person uses Control Interface # 1 to change the setpoint temperature
to 18.0
o
C, the system will now be operating at the new room setpoint temperature and both controls will display the same
setpoint temperature.
NOTES
1. Only 1 CL01-2 Control Interface can be connected to each individual air conditioning unit.
2. CP05 Control Interface is factory supplied and fitted to outdoor unit/section electrical panel.
CONTROL INTERFACE COMPATIBILITY MATRIX FOR DUAL CONTROL
Combination Options Control Interface 1 Control Interface 2
Option 1 ActronAir CP05 or CP10 ActronAir CL01-2
Option 2 ActronAir CP05 or CP10 ActronAir CP05 or CP10
Option 3 ActronAir CL01-2 or CP05 or CP10 BMS Controller