manualshive.com logo in svg

ActronAir CL01-2G, Руководство по эксплуатации

Поделиться
Скачать
ActronAir CL01-2G Скачать руководство пользователя страница 15

Operation Manual

CL01-2  Wall Controller

Operation Manual - CL01-2 Wall Controller

Document: 0525-081  

 Ver. 1 190903

 

15

09.09.  Temperature Set Back

Normally, the air conditioning system is turned Off at unoccupied times or at night. The building temperature can 
get quite hot (e.g. 30

o

C) or quite cold (e.g. 12

o

C). When you turn on the air conditioning system, it takes a long 

time to achieve a comfortable temperature (e.g. 23

o

C). The temperature set back feature will maintain the building 

temperature at pre-determined and reasonable temperature closer to your chosen set temperature (e.g. 23

o

C), thus 

giving you a big head start in achieving your comfortable temperature.  

NOTE

The air conditioning system must be turned Off before performing these procedures.

09.09.01.  Setting the Temperature Set Back

1.  Press and hold the

 FAN

 button. Press the 

PROG

 button and release them altogether. Menu 

01

 will be 

displayed with 

PROG

 indicator flashing.

2.  Press the 

 

button repeatedly until menu number 

06

 is displayed. 

3.  Press the 

PROG

 button to enter menu 

06

.

4.  Press the 

 or 

 buttons to select 

ON

 (to enable Setback feature).

5.  Press the 

EXIT

 button to enable Setback feature. 

6.  Press the 

 

button to get into menu 

07

 and then the 

PROG

 button to enter menu 

07

.

7.  Press the 

 or 

 buttons to select set back operating mode, i.e.

•  Cool mode only: 

COOL

 indicator will be illuminated.

•  Heat mode only: 

HEAT

 indicator will be illuminated.

•  Auto mode: 

COOL

 and 

HEAT

 indicators will be illuminated.

When Setback is disabled, 

SETBACK

 and 

OFF

 will be flashing.

8.  Press the 

PROG

 button to accept selection.

NOTE

Current Cool mode set back temperature will be displayed, 

SETBACK

 and 

COOL

 indicators will be 

illuminated and 

ON

 indicator will be flashing.

9.  Press the 

 

or 

 

buttons to set your desired Cool mode set back temperature.

10. Press the 

PROG

 button to lock-in your desired Cool mode setback temperature. 

NOTE

Current Heat mode set back temperature will be displayed, 

SETBACK

 and 

HEAT

 indicators will be 

illuminated and 

ON

 indicator will be flashing.

11.  Press the 

 

or 

 

buttons to set your desired Heat mode set back temperature.

12.  Press the 

PROG

 button to lock-in your desired HEAT mode setback temperature. 

SET BACK

 indicator will 

be illuminated to confirm that set back is now active. 

13.  Press the 

EXIT 

button twice to go back to Main screen.

Содержание CL01-2G































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды