Owner's Manual - R-32 Ducted Systems
Doc. No.9590-8000
Ver. 2 220616
Owner's Manual
R-32 Ducted Systems
4
03. Unit Features
Auto-Restart After Power
Failure
If the unit loses power, it will automatically restart with prior settings, once power has been
restored.
Multiple Wall Controller
Operation (Optional)
Up to three wall controllers can be installed on one system. This is particularly useful for larger
houses, where you can have controls in different locations or if multiple sensing points are
required.
Room Temp Display with
One Touch
Simply press
SELECT UP
or
DOWN
button and the set temperature display will change to show the
room temperature for 3 seconds.
Note: When zone sensors are fitted, the temperature displayed will depend on which sensor has
been selected by the wall controller (only applicable to LR7 and LC7-2).
Sense More Technology
Sense More technology means ActronAir systems come with more temperature sensing points,
which allows them to evenly maintain the temperature throughout your home no matter the time
of day.
Auto Defrost Function
(HEATING Mode)
At certain outdoor conditions (low temperature) frost may build up on the outdoor heat
exchanger. This gradual build up of frost reduces the performance of the air conditioner. The
microprocessor detects this frost build up and will automatically activate the
DEFROST
mode.
The
DEFROST
mode is displayed on the wall controller by flashing the
HEAT
symbol every 10
seconds.
Hot Start Function
(HEATING Mode)
When the air conditioner starts in
HEATING
mode, the indoor fan is delayed for a short period
of time, this allows the heat exchanger to warm up before the air starts to flow, thus preventing
excessive cold drafts. The hot start feature also activates itself when the system finishes a defrost
cycle.
Filter Clean Light
The microprocessor monitors the accumulated run time of the air conditioner and after a preset
number of hours has passed, the
FILTER
light will flash, indicating it is time to check if the filter
needs cleaning.
Note: Only applicable to ActronAir wall controllers.
Self Diagnosis
In the unlikely event that a fault develops with the air conditioner the microprocessor will diagnose
the fault (where possible) and display a fault code on the wall controller.
NOTE
Refer to individual wall controller owner's manuals for a full list of features.
WALL
CONTROL ONE
WALL
CONTROL TWO
WALL
CONTROLLER ONE
WALL
CONTROLLER TWO
