5
1 . Remove unit from shipping carton .
2 . Remove all protective materials .
3 . Check for shipping damage and loose or broken parts .
4 . Read owner's manual thoroughly prior to installation .
5 . Remove purification plates from the box and install (page 7) .
6 . Install the internal carbon filter (page 8) .
7 . Install the rear lint screen (bottom of page 8) .
8 . Fully insert cord into the power cord receptacle on the back of the unit .
9 . Determine placement location for the unit (page 9), plug the unit into a 100 volt, 120
volt, 220 volt, or 240 volt (depending on model) outlet, be sure the power switch is on,
and adjust controls according to the application .
INSTALLATION
Lint
Screen
Ozone Control
Fan Control
Front Grill
Power Switch/
Fuse/Power Cord
Receptacle
Ion Control
Power Indicator Lamp
