14
4. The purification plate(s) are making
a noise, have a burning smell, and/
or appear to arc or spark. What is the
problem?
• Purification plate is most likely cracked .
Refer to the answers for question #2, as
it would apply to this question also .
5. What are the most typical application
problems?
•
Symptom
: A belief that the proper
equipment is placed in the
environment and the equipment
appears unsuccessful .
Problem: Lack of air movement,
improper placement of the unit .
•
Symptom
: Strong odors still remain with
the environment after placement .
Problem: Lack of ozone, improper
placement of the unit .
•
Symptom
: A strong odor of ozone is
present within the environment .
Problem: Too much ozone
accumulation within the environment,
as a result of improper purifier control
setting, and/or lack of air movement .
•
Symptom
: Visual haze of smoke and/
or particulate remain within the
environment .
Problem: Lack of ionization
and/or air movement .
6. Unit does not operate.
• Is the unit plugged in?
• Is the power cord fully inserted into the
back of the unit?
• Are you sure the outlet is active?
• Is the unit turned on?
• Is the rear lint screen installed properly
to depress the safety switch forward?
7. Air flow is restricted or reduced.
• Is the unit properly placed away from
objects that may obstruct air flow?
• Are the filter and fan housing clean?
If your unit fails to operate properly after
performing troubleshooting, contact your
ActivTek Dealer for further assistance,
contact us at the address located on the
front of the manual, or visit
www.activTek.
net
for additional technical support .
