6
SETTINGS & ADJUSTMENTS
OPERATION
The ActivePure Surface & Air Guardian can be turned on or off, and adjusted, using the control panel on the front of the unit.
NOTE:
If you are operating your central heating and air conditioning fan or other ventilation system continuously, set
the coverage up to the total ventilated indoor area. Otherwise, set the coverage up to the size of the room.
CAUTION
To prevent injury, be sure the power cord is not accessible to small children.
1.
Take your ActivePure
®
unit out of the shipping carton
and remove all protective materials.
2.
Place your unit in an appropriate location which
should be four feet or higher from the ground. Never
set it on the floor. Place in a location away from
the HVAC return duct. The rear of the unit requires
one inch or more of open area to allow unrestricted
airflow.
3.
Insert the Power Supply Plug into the power
receptacle on the rear of the unit. Plug the
appropriate cord into the Power Supply and into a
working electrical outlet.
4.
Push the Power button once to turn the unit on.
5.
Push the A-PURE/A-PURE x2 button twice to set it
to A-PURE x2 level which will be illuminated on the
screen.
6.
Push the Fan + button four times to reach the highest
speed (5th level).
•
A·PURE MODE:
The unit’s display shows the
fan speed (low to high) and A·PURE to indicate
that the ActivePure
Cell and ionization are both
functioning normally.
•
A·PURE x2 MODE:
A·PURE x2 lights up, indicates
that (2) ActivePure Cells and ionization are both
functioning normally.
•
ION MODE:
Ion lights up, indicates only ionization
is functioning.
•
CLEAN:
Clean illuminates when cleaning is
required.
•
RESET:
Clears the maintenance reminders after
performing routine maintenance.
•
CELL:
The Cell light will flicker when it is time to
replace your ActivePure Cell.
For best results, run your ActivePure Surface & Air
Guardian 24 hours a day, 7 days a week, giving you
the benefits of ActivePure day and night.
POWER
(STAND BY)
Turns the unit ON and OFF.
FAN UP/FAN DOWN
Adjusts the five speed fan.
A·PURE/A·PURE x2
Toggles the unit between A·PURE Mode
(ActivePure and Ionization) and A·PURE x2
Mode (2 ActivePure Cells and Ionization).
REMINDER RESET
Clears the maintenance reminders after
performing routine maintenance.
Power ON/OFF
Reminder Reset
Fan UP
Fan
DOWN
A·PURE /
A·PURE x2
x2
x2
