ActivePure A1024F, Руководство пользователя, Страница: 9 / 32

9
WIRING THE UNIT
2 . Connect the unit to the load side of the proper fan relay .
4 . Check indicator light for proper operation with fan on .
1 . Connect wires coming from the ActivePure
®
Induct Guardian II / III unit as follows:
NOTE: All units come standard with a blunt cord .
120 Volt Unit:
Black Wire L1
White Wire Neutral
Green Wire Ground
220 Volt Unit:
Black Wire L1
White Wire L2
Green Wire Ground
International Unit:
Brown Wire L1
Blue Wire L2
Green with
Yellow Stripe Ground
Disconnect power at the breaker or fuse panel before servicing unit.
Always follow OSHA lockout procedures to prevent accidental exposure
to electrical energy.
WARNING
3 . Be sure to ground the ballast by securing the unit to the metal surface
of the AC unit or power box .
Hard wiring unit into HVAC system should be done by a licensed HVAC
installer or qualified electrical contractor only.
CAUTION
Your ActivePure
®
Induct Guardian II / III unit requires no periodic
maintenance beyond normal replacement of the ActivePure
®
Cell every
one (1) year .
The UV Bulb Indicator on the face of the unit will glow when the
UV bulb is in use . If the indicator does not glow and the unit has power,
the ActivePure
®
Cell should be replaced .
Note: For optimal performance and to maintain the Limited 5 year
warranty, it is required to replace the ActivePure® Cell every year,
even if the UV bulb appears to be operating normally .
UV Bulb Indicator
HVAC ENVIRONMENTAL CONDITIONING SYSTEM
SYSTÈME DE CONDITIONNEMENT D’AIR CVC
UV Lamp in operation when lit. | Lampe UV en marche lorsque le voyant est allumé.
MAINTENANCE/UV BULB INDICATOR