ActivePure A1024F, Руководство пользователя, Страница: 11 / 32

11
CHANGING THE ACTIVEPURE
®
CELL (CONT.)
7 . Insert the unit into the
mounting plate .
8 . Secure unit with (4)
thumb nuts .
9 . Reconnect power supply .
Power Cord
NOTE: Always follow OHSA electrical lockout safety requirements to prevent accidental release of energy
during service or maintenance activities .
Visit www . lamprecycle . org for proper bulb disposal regulations
REPLACING THE BALLAST
• Never attempt to check operation of the ActivePure
®
Cell(s) by direct
observation; severe eye damage can result; use the indicator lamps
on the bottom of the ballast only
• Disconnect power at the breaker or fuse panel before servicing
unit; always follow OSHA lockout procedures to prevent accidental
exposure to electrical energy; release of energy during service or
maintenance activities
WARNING
2 . Open the ballast housing by removing the four (4) thumb
screws then remove the cover .
HVAC ENVIRONMENTAL CONDITIONING SYSTEM
SYSTÈME DE CONDITIONNEMENT D’AIR CVC
UV Lamp in operation when lit. | Lampe UV en marche lorsque le voyant est allumé.
1 . Disconnect (unplug) power cord from unit .