ActivePure A1024F, Руководство пользователя, Страница: 10 / 32

10
CHANGING THE ACTIVEPURE
®
CELL
4 . Remove the used ActivePure Cell
from the base unit and dispose of
the bulb properly .
3 . Remove the thumb screws on
either side of the ActivePure
®
Cell to remove the cell from the
ballast assembly .
WARNING
• UV Light in operation; disconnect unit from power cord before
servicing; failure to follow warnings may result in severe eye damage
• If the unit is hard wired, be sure the power to the unit is off;
always follow OHSA electrical lockout safety requirements
to prevent accidental release of energy during service or
maintenance activities
2 . Remove the ActivePure
®
Induct
ballast assembly by removing the
four (4) thumb screws and sliding
the unit out .
1 . Disconnect (unplug) power cord
from unit .
5 . Plug the new ActivePure Cell into the base
unit . Be sure Air Flow / Honeycomb Cell
direction is correct .
6 . Secure with (2) thumb screws .