Infrared Modem User’s Manual
Page
25
of
41
Revision 1.0
2003/11 From 3JTech
4. Tap the “Advanced Setting”. Set the AT-command at “ATDT”, speed at ”57600”,
Hardware flow control “not select”. And tap OK. Then tap “Next”.
5. The second screen appears telling you to set the connection ID and connection
password. Then tap ”Next”.
6. Setting your Proxy, or “No Proxies”. Then tap ”Next”.
7. The next screen appears telling you to set up the e-mail settings.Then tap ”Next”.
8. Check your setting on this page. Tap “Register” to finish Modem Setting.
9. Tap the Connection Status icon (
) on the taskbar. The pop-up list for network
