Infrared Modem User’s Manual
Page
6
of
41
Revision 1.0
2003/11 From 3JTech
System Requirements
PDA or any hardware devices with IrDA or RS232 serial interface and any of the
following Operating System: Windows 95 and above, DOS, Linux, WinCE, Palm OS,
PSION, Penbex and others
…
Front View
1.
Speaker
produces the sound to show the connection to the ISP or host device.
2.
IR Module
output the Infrared signal to search and connect to another Infrared
device.
3.
LED
shows the status of on-line, infrared connection and power of the battery.
Rear View
1.
Multi switch
for selecting functions among Serial, Off and IR
2.
RS-232/Power port
for connecting to a PDA, PC or other device with serial port
using the serial cable included in this package.
3.
Phone Jack
for connecting to telephone line.
4.
Power Jack
for connecting to the AC power supply through a 100~240VAC
travel charger.
Battery Compartment
The modem could be used with four rechargeable AAA batteries or four regular
disposal batteries. When use with disposal AAA battery, you could also use four
batteries. There is a better efficiency when using three disposal batteries.
Connecting the travel charger, the smart circuit inside the modem will automatically
