Infrared Modem User’s Manual
Page
9
of
41
Revision 1.0
2003/11 From 3JTech
IV. SOFTWARE INSTALLATION GUIDE
For Palm Organiser
(1) Hardware needed:
1.
3JTech. Pegasus III series modem
2.
Pilot 1000*. Pilot 5000*, Palm Pilot Personal*, Palm Pilot Professional*,
Palm III and above (IIIe Not include), IBM Workpad series and TRGPro
3.
Cable for Palm III or Cable for Palm V
(The Serial Cable synchronizes the Palm organizer and the Pegasus modem.
One end of the cable is a Palm connector (see
Note
below); the other end is
the MiniDIN 9Pin male connector that connects to Pegasus III modem. Please
follow the following steps)
(2) Software needed
1.
Palm Desktop 3.0.1 or above
2.
Palm OS 3.3 or above**
(3) Modem Set-up:
1.
Tap on
"APPLICATIONS"
2.
Tap on
"PREFS" (
Preferences
).
3.
Go to the top right hand corner under
"Preference"
page, and tap on the drop
down menu.
4.
Tap on
"CONNECTION"
in the drop-down menu on the top right hand
corner.
5. Tap on “
New
”.
6.
Next to
"Name",
write
IR MODEM
.
7. Next to
Connection Method
select
IrCOMM to MODEM
.
