20
ScreenBeam Wireless Display Adapter Kit
Updating the Display Adapter Firmware Only
If you are using ScreenBeam with a Miracast or WiDi device, use the following
procedure to update the Display Adapter’s firmware.
1.
Download the latest ScreenBeam firmware for SBWD100A.
2.
Extract the “install.img” from the zip file.
3.
Copy “install.img” file to a USB flash drive in its root directory.
Note
: Do not use a portable USB hard drive. Use a USB flash drive only.
4.
Plug the USB flash drive into the USB port on the ScreenBeam Display
Adapter.
5.
Unplug the Power connector from Display Adapter.
6.
Press and hold the Reset button on the Display Adapter with the tip of a
pen.
7.
While holding the Reset button, plug the Power connector into the Display
Adapter and wait.
8.
When the Upgrade message appears on your HDTV screen, release the
Reset button.
Note
: Do not power off or remove USB flash drive while the Display
Adapter is upgrading.
9.
Wait until the upgrade completes and then remove the USB flash drive.
The ScreenBeam Display Adapter’s firmware is now upgraded.