22
2.
Be sure to enter password a second time in the
Re-enter New Password
text
box,
3.
Click
Apply
.
If you want to disable the password mode after it has been activated, you must
select the "
Restore Default
" button on this page.
If you receive the Access Point after it has had a password set but do not know
what it is,
you can disable the password mode without accessing the control panel by
physically resetting the access point
. This is done by by holding the “
Reset
” button
on the back of the Access Point for 15 seconds, releasing it, and waiting for the
unit’s software to initialize. The Access Point is ready when the
Power
light stops
blinking and turns a steady green.
Save and Restart
After finishing making changes to the Access Point’s settings, click
Save and
Restart
button to save the settings.
Upgrading Your Access Point’s Firmware
The
Upgrade Firmware
section of the
Administration
menu can be used to load
software upgrades that add features, improve performance, or track changes to
