Ass
Ass
oc
oc
ia
ia
tions
tions
To access the associations page, click on the “Assoc” tab. Here you can verify the
devices that are currently connected to your 54 Mbps Wireless Access Point. The
associated device’s MAC (Media Access Control) address will be displayed inside the
green MAC Address field.
W
W
ir
ir
eless
eless
Here you can install items such as the Performance Mode, identification of the
device, radio channel to be used as well as the Transmition rate or data speed.
Visibility Status:
When invisibility is selected, the Access Point will be protect-
ed against its discovery from wireless “sniffer” programs. In order to con-
nect to the Access Point, all wireless clients must use the Access Point’s des-
ignated SSID value.
Phy Profiles Mode:
There are five options you can choose from.
802.11g onl: This option supports only 802.11g Products.
802.11g Maximum Performance: This option configures the Access Point
to only allow connectivity to 802.11g devices operating at a peak data rate
of up to 54 Mbps. By selecting this performance mode, all 802.11b devices
will be excluded. For increased performance, select “Short Preamble”
from the Advanced page.
Maximum Interoperability using 802.11 b/g Mixed Mode: This option
configures the Access Point to allow automatic detection of 802.11b and
802.11g devices connected to the wireless network.
By selecting this performance mode, all devices wirelessly linked to the
Access Point will operate at reduced data rates than those while operating
in their respective native protocol.
802.11 b/g Mixed Mode Long: A Long Preamble provides universal
compatability for devices connecting to the Access Point.
802.11b only: Reduces all traffice to 802.11b standards of 11 Mbps.
V
V
14
15
Configuring the
Action
tec 54 Mbps Wireless Access Point
Configuring the
Action
tec 54 Mbps Wireless Access Point
Starting the Web Interface
Once the
Action
tec 54 Mbps Wireless Access Point Configuration Utility has finished
and the
Action
tec 54 Mbps Wireless Access Point is available for configuration in the
network, configure it by using any Web Browser.
1.
Launch the Web Browser and type the following address in the Address Field
http:\\192.168.1.240
, press Enter to continue.
2.
Enter the
Username: Admin
and
Password: Admin
- Press
enter
to continue.
3.
When the following screen appears, begin configuring your 54 Mbps Wireless
Access Point.
Web Interface Contents
The Web Interface application allows you to view and carry out setting changes for
the
Action
tec 54 Mbps Wireless Access Point. Refer to this list when changing your
Action
tec 54 Mbps Wireless Access Point internal settings.
Inf
Inf
o
o
This page contains information about the
Action
tec 54 Mbps Wireless Access Point.
This is the Initial Page on the 54
Mbps Wireless Access Point.
This is only an information screen
and does not allow changes.
MAC address
