Installation & Commissioning Guide - ESP Platinum ID Split Ducted Units
Doc. Part No. 0525-052
Rev. 4.0 180302
Page 6 of 16
TWO-PIECE FAN COIL (FRQ4-19AS / ARV4-19AS)
The innovative 2 - PIECE fan coil system can provide a solution to difficult and tight roof space installations. This versatile system comes as a separate fan and coil
sections. Each compact and lightweight section is simply installed in two separate locations and is then joined by flexible ducting.
Ducting is attached to each section by either a 1, 2 or 3 way EASY FIT supply plenum or a twin spigot duct plate, these can be fitted to either side of each section.
UNIT FEATURES
● Designed for ease of installation
in difficult roof spaces.
●
3 - Speed Fan Setting.
●
Internal Drain Tray.
●
External Condensate Drain Tray.
● Mounting studs for perforated
hanging strap.
●
Incorporates the EASY FIT
supply & return air plenum system.
●
Reduce return air noise.
● Integrated Fan Coil Safety Tray.
●
Supplied with Drain Kit & P-Trap
WEIGHTS AND DIMENSIONS
Coil Section
Weight
(kg)
Height
(mm)
Depth
(mm)
Width
(mm)
Fan Section
Weight
(kg)
Height
(mm)
Depth
(mm)
Width
(mm)
ARV4-19AS
38
435
340
1355
FRQ4-19AS
46
435
410
1270
MODEL COMBINATION CAPACITY RATINGS AND ELECTRICAL DATA
Outdoor
Unit
Indoor
Coil Section
Indoor
Fan Section
Total Cooling
Capacity
(kW)
Total Heating
Capacity
(kW)
Airflow
(l/s)
(Min
/
Nom
/
Max)
RLA
(ID
/
OD
/
Total)
FLA
(ID
/
OD
/
Total)
CRQ4-19AS
ARV4-19AS
FRQ4-19AS
17.55
18.50
240 / 900 / 1150
18.9 / 4.0 / 22.9
26.9 / 4.0 / 30.9
NOTES:
1.
AIRFLOW ACROSS THE COIL MUST BE NO LESS THAN THE COMPLETE FAN SECTIONS
MINIMUM AIRFLOW.
2.
EXTERNAL STATIC PRESSURE IS THE SAME AS THE STANDARD SRG MODEL FAN COIL.
REFER TO THE COMPARABLE FAN CURVES FOR EACH MODEL.
3.
REFER TO INSTALLATION SECTION FOR PLENUM COMBINATION OPTIONS.
4.
WEIGHTS AND DIMENSIONS ARE NOMINAL VALUES.
5. FOR
ADD-ON COOLING
, ACTRONAIR DOES NOT RECOMMEND DUCT PLATE ON SUPPLY SIDE.
2-WAY SUPPLY
PLENUM
FAN SECTION
COIL SECTION
4.0 m Max
0.0 m Min
3-WAY SUPPLY
PLENUM
DUCT PLATE
TWIN SPIGOT
DUCT PLATE
3-WAY SUPPLY
PLENUM
2-WAY SUPPLY
PLENUM
TWIN SPIGOT
DUCT PLATE
1-WAY SUPPLY
PLENUM
UNIT FEATURES
The innovative 2-PIECE fan coil system can provide a solution to difficult tight roof space installations. This versatile system comes as a
separate fan and coil section. Each compact and lightweight section is simply installed in two separate locations and is then joined by
flexible ducting.
Ducting is attached to each section by either a 1, 2 or 3 way EASY FIT supply plenum or a twin spigot duct plate, these can be fitted to
either side of each section.
ADD-ON COOLING is simply achieved by fitting only the coil section into an existing ventilation system.
TWO-PIECE FAN COIL & ADD-ON COOLING COIL
Note: External static pressure is the same as the standard model fan coil, refer to the comparable fan curves for each model.
SRA13-20A1-080221
ActronAir is constantly seeking ways to improve the design of it's products, therfore Specifications are subject to change without notice. Please check prior to purchase.
COIL SECTION
Designed for ease of installation in difficult roof spaces.
3-Speed Fan Setting.
ABS Plastic Internal Drain Tray.
External Condensate Tray.
Mounting studs for perforated hanging strap.
Integrated Fan Coil Safety Tray supplied with Drain Kit & P-Trap.
Incorperates the EASY FIT supply & return air plenum system.
Reduced return air noise.
Note: Airflow across the coil must be no less than the comparable fan sections minimum airflow specified in the table below.
MODEL
SRA13A
SRA16A
Nett Cooling
Capacity kW
11.00
14.02
Nett Heating
Capacity kW
11.90
15.11
Depth
(mm)
350
350
Height
(mm)
410
410
Width
(mm)
1050
1150
Weight
(kg)
23.0
25.0
SRA17A
16.80
17.89
350
410
1250
29.0
FAN SECTION
Depth
(mm)
400
400
Height
(mm)
410
Width
(mm)
1010
Weight
(kg)
31.0
410
1010
32.0
Maximum
Hi-Speed (I/s)
730
930
Minimum
Lo-Speed (I/s)
550
700
Power Supply
Nominal
Air Flow (I/s)
630
800
MODEL
(V/Ph/Hz)
Full Load Amps
2.88
3.65
240/1/50
240/1/50
SRA13F
SRA16F
400
410
1010
35.0
1040
780
900
4.18
240/1/50
SRA17F
COIL SECTION
FAN SECTION
6.0 m Max
0.0 m Min
NOTE:
Maximum cable length between fan and coil sections = 4.5m.
OUTDOOR UNIT
Power Supply
Single Phase
230V / 1Ph+N / 50Hz
Three Phase
400V / 3Ph+N / 50Hz
INDOOR UNIT
Power Supply
230V / 1Ph + N / 50Hz
NOT to be used for
Add-On Cooling
2-WAY SUPPLY
PLENUM
FAN SECTION
COIL SECTION
4.0 m Max
0.0 m Min
3-WAY SUPPLY
PLENUM
DUCT PLATE
TWIN SPIGOT
DUCT PLATE
2-WAY SUPPLY
PLENUM
FAN SECTION
COIL SECTION
4.0 m Max
0.0 m Min
3-WAY SUPPLY
PLENUM
DUCT PLATE
TWIN SPIGOT
DUCT PLATE
