![Action Sports Equipment S000435 Скачать руководство пользователя страница 15](http://html.mh-extra.com/html/action-sports-equipment/s000435/s000435_assembly-installation-care-maintenance-and-use-instructions_2842969015.webp)
TRAMPOLINE ASSEMBLY
For ease of installation, it is recommended two adults assemble the trampoline. While one adult is
connecting the relevant pieces, the other adult can assist by supporting the frame and holding the
connecting pieces in the appropriate position.
Frame Assembly
1.
As there are three different types of top rail tubes,
it is very important to lay out the parts on a clear
dry level surface to form a loop as shown in
Figure 1.
The top rail tubes (A, B & C) should form a
circle, with the spring hole eyelets facing
upwards.
A T-joint (G) should be placed between top rail
A & A sections.
2.
To complete the Legs assembly. Connect the Vertical
Leg Tubes (D & E) with the W-Shape Leg Tube (F) as
shown in Figure 2.
Align holes, secure D, F & E with the Bolts (L) and
Long Nuts (K). See Fig. 2.
3.
Connect the Top Rail Tube (A) by sliding the
wider end
of the tube
into the T-Joint (G) first. Then connect the
Top Rail Tubes (B & C) to form the top rail loop as
shown in Figure 3.
If standing on the outside of the circle created in step 1,
the wider end should be on your left hand side. Slide the
SMALLER END
(right hand side) of the next Top Rail
tube into the T Joint and follow this process around the trampoline to
form the top rail loop.
Push each section firmly to ensure both ends of the rail pieces are firmly in position within the T
Joint. Please see Figure 3.
©
ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au
Page: 15