The green LED flashes twice rapidly with a gap between. Set the throttle to
the neutral position. Press button A to confirm the neutral position has
been set on the throttle. The LED changes to alternating red and green
Press button B to move onto the next stage. If you wish to change the
neutral throttle position, set the stick accordingly and press button A again
then press button B to move to the next stage. If there is a “run.wav” sound
on the SD-CARD the P110 starts to play it.
The P110 flashes the red LED slowly. Adjust the throttle stick to set the idle
speed of the engine sound and press button A to confirm the idle speed
has been set. The LED changes to alternating red and green
Press button B to move onto the next stage. If you wish to change the idle
speed , set the stick accordingly and press button A again then press button
B to move to the next stage.
The red LED flashes twice rapidly with a gap between. Adjust the throttle
stick to set the maximum throttle speed of the engine sound and press
