Power up
When the system is powered up, it performs a set of diagnostics to ensure
the system is able to run. The status is indicated by the LEDs:
A rapidly flashing red LED indicates that either no SD card is inserted or the
write protect is set. Insert the SD Card after ensuring the write protect is
disabled.
If the SD card with the write protect set off is detected, the LEDs change to
rapidly alternating red and green. The P110 stays in this state until it
detects a valid signal from the receiver on one or more of its input.
Once a servo signal is detected the LEDs change to a slow alternating red
and green. After a few seconds the LEDs switch off and the P110 is ready for
normal operation.
Operation
Once the system has started up, the engine sounds can be started by
pushing the appropriate throttle lever past the neutral position in either
direction. This will play the engine start sound followed by the run sound. If
the throttle is left in the neutral position for more than 60 seconds, the
P110 will play the engine stop sound and silence the engine sound. The
other sounds can still be played
