actiLib Autoloader 1U
– User and Service Guide
Page 76 of 97
Use the OCP, see section 7.5.2, or
use the RMU, see section 7.5.3
2.
The finger holes on the back side of the magazines (see Figure ) allow the user to pull the
cartridges out of the slot. Remove and insert the cartridge mechanically. Repeat the
process ten times.
Figure 60 Removing stuck tapes from slot
3.
During this process any burr on the cartridges will be removed.
4.
Insert cartridge in the magazine
5.
Put the magazine back to the tape loader.
